FireStik SS-J4A Jeep Wrangler Hood Mount for CB Radio Antenna
Availability: In stock
These mounts were designed around Jeep Wrangler's body style (97-99). The mount allows the antenna to be mounted on either the left or right side of the vehicle. The stainless steel mount and support bracket are made from 12 guage (0.109") stainless steel. After the mount is installed, there will not be any visible mounting holes. All mounting hardware (also stainless steel) is hidden under the vehicles hood. Even though there were no installations on earlier model years, the mounting concept is very basic and the probability of these mounts working on pre-1997 Jeeps is high. Both mounts are complete with a standard 3/8"-24 threaded antenna mounting stud. Click here to see some installation photo's. If the vehicle is being used over severe terrain, the mount should be moved forward (closer to the fender bolt) for added stability. The design of the Jeep fender leaves a large portion of the fender unsupported near the windshield.
The SS-J4A has a SO-239 stud mount making it compatible with all coax cables that are terminated with standard UHF PL-259's.
Note: The rearward part of the fender on newer Jeeps does not have the same support that was found in earlier models. On these vehicles we recommend that the bracket be mounted at least 8-inches (20cm) forward of the rear edge of the fender where it has sufficient support. If this is not followed, or if the rear part of the fender is not given additional support, the fender, dependent upon the antenna size, will flex from any whipping action of the antenna.
|Product Name||FireStik SS-J4A Jeep Wrangler Hood Mount for CB Radio Antenna|
|Manufacturer Part Number||SS-J4A|
|Product Type||Antenna Mount|