PAC CAM-NI1 Reverse Camera Harness

Compatibility Requirements:

• Vehicles must be equipped with a 4.3" inch radio display.
• Aftermarket camera required but not included in this listing.

Installation requirements/notes (Please read carefully every specification):

• A back-up camera is required, but not included in this listing.
• Warning: The harness will provide 6 volt power output. If you are using a camera that is NOT capable of being powered by 6 volts, you must find your own source of 12 volt ACC power.
• Camera must have power before the vehicle is placed into reverse, so using the reverse lamp power source is not an option.
• *In some cases, it may be necessary to provide a reverse trigger to the radio. Normally a reverse trigger is provided by the vehicle manufacturer, as long as the camera has power when the vehicle is placed into reverse, the radio should automatically switch to the reverse camera. In the event that the radio does not automatically switch to the reverse camera a +12v reverse signal will need to be added to Pin 30 of the 32 pin connector.
• Yes, the possibility of splicing wires is always present in any car installation. If you don't feel comfortable doing these connections, PLEASE consult a professional or a certified technician.

Vehicle Compatibility List:

• Nissan, Altima, 2010-2015
• Nissan, Frontier, 2013-2016
• Nissan, Juke, 2015
• Nissan, Leaf, 2013-2015
• Nissan, Quest, 2011-2017
• Nissan, Rogue, 2011-2015
• Nissan, Sentra, 2010-2015
• Nissan, Titan, 2013-2015
• Nissan, Versa, 2014-2015
• Nissan, Versa Note, 2014-2015