PAC LPA-2.2 Advanced Line Output Converter 2 Channel LOCPRO with Steel Housing

PAC LPA-2.2 Advanced Line Output Converter 2 Channel LOCPRO with Steel Housing

Hook Fits For Car's Factory System

One of the best ways to add an amplifier or powered subwoofer to a factory system is with a line output converter (LOC), which reduces the factory system's high-level outputs down to the preamp-level signals your aftermarket amp can handle. PAC's LPA-2.2 Advanced line output converter will work with just about any factory system, even amplified premium systems, to help you add an aftermarket amplifier in your vehicle.

Features For Adding A Sub

The LPA-2.2 active line output converter lets you add an amp without affecting the existing factory system - you just tap into the wires going to a pair of full-range speakers for the LPA-2.2's inputs. Selectable load resistance and ground isolation options ensure trouble-free OEM integration. A gain control with a clip light adjusts the signal level for optimum strength and fidelity. A low-pass filter and bass boost fine-tune the bass to sound its best. An optional wired remote is available, so you can control the bass level from your front seat.

Boosting Two Channels

The 2-channel LPA-2.2 can also be used when adding a 2-channel amp to upgrade the power of your sound system's front stage, for example. PAC offers vehicle-specific T-harnesses that'll greatly simplify installing this LOC in a select number of vehicles with non-amplified factory stereos.

Product Highlights:

• 2-Channel active line output converter
• Designed to work with most factory systems
• Speaker-level inputs (0.5-40V)
• Can handle up to 400 watts RMS per channel
• Selectable input loads for OEM integration (20, 60, or 20,000 Ohms)
• Variable gain control with clip indicator
• Selectable low-pass filter (250 Hz)
• Variable bass boost (0-12dB at 45 Hz)
• Up to 9.5 Vrms output