Rockford Fosgate HD14-STG5 Stage-5 Audio Kit

Rockford Fosgate HD14-STG5 Stage 5 Audio Kit

Ready to upgrade the sound on your Harley-Davidson Road Glide or Street Glide? Go big with Rockford Fosgate's Power Series Stage 5 kit. Designed to fit your Harley, this speaker and amp package features 6.5" fairing and 6x9" saddlebag speakers, two 10" subwoofers, plus a pair of compact, weather-resistant 4-channel amplifiers with user-friendly amplifier kits. This system gives you big sound, plus impressive bass performance. It's the ultimate in audio for your Harley!

Compatibility note: This kit is designed to work with 2015-20 Harley-Davidson Road Glide or 2014-18 Street Glide touring bikes only.

Important note: All 2014-up Harley radios use a “high fidelity” EQ curve which will cause severe distortion (and potential speaker damage) in any audio upgrade. You'll need to get your radio reflashed by your local authorized Rockford Fosgate motorcycle audio dealer.

Kit Highlights:

• Audio kit includes two 6-1/2" fairing speakers, two 6"x9" saddlebag speakers, two 10" subs, two 4-channel amps, and an amp wiring kit
• Designed for select Harley-Davidson Road Glide, Street Glide, and Electra Glide motorcycles

Rockford Fosgate TMS65 6-1/2" full-range speakers

• Designed for your Harley's fairing speaker locations
• Element-Ready design is weather- and water-resistant
• Power handling: 75W RMS/each (150W peak/each)

Rockford Fosgate TMS69BL14 6"x9" 2-way speakers

• Designed to fit your Harley's hardshell bags
• Element-Ready design is weather and water-resistant
• Power handling: 100W RMS/each (200W peak/each)

Two Rockford Fosgate M1D2-10B subwoofers

• 10" M1 Series 1 subwoofer with dual 2-ohm voice coils (non-LED model)
• Preloaded in custom sub enclosures designed for saddlebags
• Power handling: 300W RMS/each (1200W peak/each)
• Sensitivity: 91.5 dB
• Includes grille sealing plugs
• Note: The speaker impedance switch should be left in the 4O position for proper operation with the included M5 amplifier.

Two Rockford Fosgate M5-800X4 marine/powersports 4-channel amplifiers

• Class AD amp technology
• 100W RMS x 4 at 4 ohms (400 watts peak)
• Bridged power: 200W RMS x 2 at 4 ohms
• Conformal-coated circuit board — suitable for power sports and marine applications
• Twin cooling fans and real-time thermal sensing
• Includes Rockford Fosgate RFK-HD14 amplifier kit
• Radio must be re-flashed by an authorized Rockford Fosgate motorcycle audio dealer

What's in the box?

• M5-800X4:
  • 4-Channel powersports amplifier
  • 11" Power/ground/turn-on & speaker output harness (installed on amp)
  • 11" Input harness (installed on amp)
  • Two 14" RCA-to-Molex input adapters
  • Power/ground/turn-on adapter plug
  • Two 7.5" speaker output harnesses
  • 3mm Allen key
• TMS65:
  • Two 2-way speakers
  • 2 Street Glide grilles
  • 2 Road Glide grilles
  • 2 Tour-Pak grilles
  • Installation manual
• TMS69BL14:
  • Two 2-way speakers
  • 2 Grilles
  • 2 Mounting brackets
  • 2 Speaker protectors
  • 2 Templates
  • One 8' Main harness
  • Two 27" Saddlebag harnesses
  • Sixteen 1/2" Screws
  • Sixteen 7" Zip ties
  • 10 Adhesive backed zip tie mounts
  • 2 Cable clamps
  • Installation manual
  • 2 Saddlebag load warning stickers
• HD14-SBSUB:
  • Brake Side:
    • Subwoofer enclosure loaded with one M1D2-10B subwoofer
    • 4-Channel powersports amplifier w/ installed direct-connect harnesses
    • Cutting & drilling template panel
    • Grille
    • Block-off panel
    • Trim ring w/ 3M adhesive backing
    • Wire pass-thru panel w/ 3M adhesive backing
    • 28" Subwoofer wire harness w/ 3M adhesive backing
    • 3mm Allen key
    • 4 Plug covers w/ 3M adhesive backing
    • Amplifier instruction manual
    • Amplifier tuning guide
    • Saddlebag Notice
  • Clutch Side:
    • Subwoofer enclosure loaded with one M1D2-10B subwoofer
    • Cutting & drilling template panel
    • Grille
    • Block-off panel
    • Trim ring w/3M adhesive backing
    • Wire pass-thru panel w/3M adhesive backing
    • Amplifier mounting plate
    • Amplifier cover
    • 8' Main wiring harness (inline 40A ATO fuse)
    • 28" Subwoofer wire harness w/3M adhesive backing
    • Amplifier output Y-adapter harness
    • 45mm Hole saw bit
    • Four 1-1/4" mounting bolts
    • 4 Mounting-bolt clips
    • Eight 3/4" screws
    • Eight 12mm machine screws
    • Eight 6mm screws
    • Two 4mm machine screws
    • 4 Flat washers
    • 2 Nuts
    • 2 Wire plugs
    • 5mm Allen key
    • Twelve 7.5" wire ties
    • HD14-SBSUB instruction manual
• RFK-HD14M5:
  • 1 Amp mounting bracket
  • 1 Heatsink
  • 34" T-harness
  • 65" Power/ground harness w/ inline 60A Maxi fuse
  • 20" Amplifier output harness
  • 12" Amp output harnress
  • 16" Fairing harness
  • 2 Amp output Y-adapters
  • 5 Amp bypass plugs
  • Eight 8" wire-ties
  • 4 Threaded post adapters
  • Two 16mm bolts
  • Four 18mm counter-sunk screws
  • Four 10mm counter-sunk screws
  • Four 8mm hex-socket screws
  • 2 Flange-nuts
  • Installation guide

Compatibility: The HD14-STG5 sound system is compatible with the following model Harley-Davidson motorcycles: