Rockford Fosgate Punch P300-10 300W Amplified 10'' Powered Subwoofer

Punch Single 10" 300 Watt Amplified Subwoofer

The P300-10 powered subwoofer is an “all-in-one” solution when adding bass to a factory system or just to save space. This model features a 10” subwoofer in a sealed enclosure powered by an internal 300 watt amplifier.

Overview:

If you need to quickly add bass to a system or want to alleviate the hassle of separate amplifiers and subwoofers, then the P300-10 is the right one for the job! The P300-10 features a Punch 10” subwoofer in a custom sealed enclosure and is powered by a mighty 300 Watt amplifier. The system is all-inclusive, so you only need to run power, ground and a signal from the source to get this baby moving. Features a durable exterior that resists scrapes and bumps while in the trunk or cargo area.

• "Closed-loop" design ensures optimum performance between woofer, amplifier and enclosure
• Built-in 0°/180° phase switch
• Separate low level and speaker level inputs
• Built-in adjustable bass boost EQ
• Adjustable 12db/Octave low pass crossover
• Detachable Power/Ground connector
• Intelligent auto turn on/off function
• Thermal and over/under voltage protection
• High-efficiency, low current design
• Remote bass level control included
• Proprietary high output woofer
• Constructed with 5/8" MDF
• Large AWG input terminals
• Covered with industrial heat activated vinyl
• 1 Year Warranty

Specifications:

• Power Handling: 300 Watts RMS
• "Closed loop" design ensures optimum performance between woofer, amplifier and enclosure
• Built in 0°/180° phase switch
• Separate low level and speaker level inputs
• Built in adjustable bass boost EQ
• Adjustable 12db/Octave low pass crossover
• Detachable Power/Ground connector
• Intelligent auto turn on/off function
• Thermal and over voltage protection
• High efficiency, low current design
• Remote bass level control included
• Proprietary high output woofer
• Constructed with 5/8" MDF
• Large AWG input terminals
• Covered with industrial heat activated vinyl
• System Configuration: Sealed
• Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
• Speaker Connector: n/a
• Frequency Response: 35Hz to 150Hz
• Integrated Amplifier: 300 Watts RMS
• Crossover Controls: Variable 50Hz to 200Hz @ 12dB/Octave Butterworth
• Tone Controls: Gain & Bass Boost
• Signal Input: Low Level: 1 RCA Pair
• High Level: Left/Right Summed Inputs
• Power Input Connector: Removable Connector Power/Ground/Remote
• Power Wire Gauge: 8 AWG
• Heat Sink Type: Extruded Aluminum
• Cooling: Convection
• Remote Control: Include
• Visual Indicators: Power, Protect
• Circuit Topology Class: Class D