Rockford Fosgate M5-1000X1 Waterproof Monoblock Amplifier

Rockford Fosgate M5-1000X1 Waterproof Monoblock Amplifier

Rockford Fosgate M5-800X4 4-Channel Waterproof Amplifier

Rockford Fosgate M5-800X4 4-Channel Waterproof Amplifier

Rockford Fosgate M5-1500X5 5-Channel Waterproof Amplifier

$929.99
Availability: In stock
SKU
Rockford Fosgate M5-1500X5

The M5-1500X5 amplifier features the next level of Element Ready™ design from Rockford Fosgate that’s built as rugged as the outdoor environment it’s used in. The IPX6 rating is provided by a water tight seal featuring splash guards on both ends and heavy-duty molded harnesses with integral sealing gaskets. A new PRESET switch - for use with Rockford Fosgate UTV audio kits - eliminates the need to set-up and tune the amp for the best experience possible. Built on the popular TM series, M5 amplifiers feature the same great technologies like Constant Power, Class-AD and C.L.E.A.N., all engineered, developed, and validated in Tempe, Arizona.

Rockford Fosgate amplifiers are known world-wide for producing more power than their ratings suggest. The M5 amplifiers are the first series based on new industry standard Dynamic Power ratings, bringing their conservative ratings to the forefront. Engineered from the ground up and purpose-built to deliver more output where you actually hear it, this is real dynamic power that performs not only on paper, but performance heard through the musical experience. You’ll see two amplifier power ratings, the traditional Continuous Power output, and the new Dynamic Power output, both tested in accordance with the CTA-2006 specification. Consider Continuous Power as wattage developed on the test bench for comparison against other amplifiers in the same class, and Dynamic Power as real-world wattage when connected to a speaker load, listening to music. Either way you look at it, Rockford Fosgate is proving – once again – these amplifiers are powerful enough to drive any speaker or subwoofer you throw at them.

Key Features

  • Element Ready™ with integrated harnesses for a watertight seal
  • PRESET removes the need to set-up and tune the amp when used with Rockford Fosgate UTV audio kits
  • Play all day, easy to integrate, and keep music playing for extended lengths of time
  • C.L.E.A.N. input/output clip detection and indicator LEDs
  • Constant Power provides instantaneous delivery of output over varying impedance loads
  • Focused mass heat sink allows critical aluminum material to be located around hottest internal devices
  • Top mounted control panel with waterproof smoked lens
  • OEM and aftermarket radio integration inputs
  • Low Impedance Stability
  • Proprietary testing using RATS (Rockford Automated Testing System)
  • Proprietary Class-AD technology allows amplifier to produce more power with less current draw
  • Class-BD technology provides 75-80% efficiency over traditional class A/B designs
  • Discrete Surface Mount technology utilizes 1% tight-tolerances for high efficiency and reduced cross-talk
  • MESHA 4 reduces MOSFET temps, lowers distortion, increases durability and prolongs device life span
  • Chassis Isolation from mounting points greatly reduces possible introduction of vehicle noise
  • Balanced Differential Inputs eliminates noise picked up by signal cables
  • Remote-Out feature when using high level inputs

Features

  • Element Ready™ - Amps
    These amplifiers are protected against Dust, UV, Corrosion, and feature Stainless hardware.
  • CTA-2006 Compliant
    Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
  • Class-AD
    This technology allows the amplifier to produce more power with less current draw from the vehicle's charging system.
  • Class-BD
    Class-BD amplifiers have 75-80% efficiency ratings vs. 20-60% efficiency ratings of traditional Class-A/B amplifiers.
  • DSM
    DSM utilize 1% tight-tolerances improving efficiency of the circuit, decreases cross-talk from other discrete components and lowers operating temperature.
  • P.O.W.E.R.
    Power supply circuit design that allows the amplifier to increase output power as voltage increases.
  • MEHSA 4 (Maximum Efficiency Heat Sink Application)
    MEHSA4 reduces MOSFET temperatures, lowers distortion, increases durability and prolongs the output device life span.
  • C.L.E.A.N. Set-Up
    C.L.E.A.N. (Calibrated Level Eliminates Audible Noise) is a patented circuit with in/out clip LEDs to help match a source to amp and optimize output.
  • Balanced Differential Inputs
    Differential inputs eliminate noise picked up by signal cables.
  • Constant Power
    Constant Power is a patented circuit topology that provides instantaneous delivery of output power over varying impedance loads.
  • Punch EQ2
    Onboard equalizer with up to +18dB @ 45Hz and/or up to +12dB boost at 12kHz.
  • NOMAD
    NOMAD is a "real time" analog computer that protects your amplifier from shorting speaker wires and dangerously low speaker impedances.
  • Engineered In The USA
    These Avatars are a personal signature from the Rockford Fosgate team member(s) who designed and engineered this fanatic product. This statement illustrates our commitment to being Designed and Engineered in the U.S.A.

General Specifications:
Number of Channels : 5
Efficiency : >75%
Maximum Current Draw : 90 A @ 4 Ohms/4 Ohms, 140 A @ 2 Ohms/2 Ohms, 170 A @ 2 Ohms/1 Ohms, 150 A @ 4 Ohms bridged
Average Current Draw : 55 A
Recommended Fuse (A) : 200 (Not included)
Operating Voltage : 9 - 16 VDC
Heatsink : Die Cast Aluminum
Cooling : Convection
Speaker Wire Gauge (AWG) : 16
Power Input : Connector Compression Terminal Block
Power Wire Gauge (AWG) : 8
Visual Indicators : Blue (Power), Red (Protect), Red (Input clip), Blue/Red (Output clip)
Crossover Controls : 30 Hz @ 12dB/Octave Butterworth (Infrasonic)
Tone Controls : 12.5 kHz 14dB/Octave Butterworth (High-pass), 45 Hz @ 18dB/Octave Butterworth (Low-pass), 45 Hz @ 14dB/Octave Butterworth (Sub)
Signal Input : 2 RCA (Low-level), 4-Pin Molex (High-level)
Total Harmonic Distortion : <1.0% (4 Ohms), <1.0% (2 Ohms)
Input Sensitivity : 150 mV - 4 V (Low-level), 450 mV - 12 V (High-level)
Total Power Handling (RMS) : 100W x 4 + 400W x 1 @ 4 Ohms, 100W x 4 + 600W x 1 @ 1 Ohms, 600W x 1 @ 2 Ohms, 200W x 2 + N/A @ 4 Ohms bridged
Remote Control Included : No
Total Power Handling Maximum : 1500 Watts
Amplifier Class : Class AB (Front/rear channels), Class BD (Sub channel)
Frequency Response : 10Hz - 50kHz
Low-Pass Crossover Frequency : 50 Hz - 250 Hz @ 12dB/Octave Butterworth
High-Pass Crossover Frequency : 50 Hz - 250 Hz @ 12dB/Octave Butterworth
Speaker Output Connector : 4-pin Molex to tinned bare wire
CEA-2006 Compliant : Yes
Bridgeable : Yes
Dynamic Power : 125W x 4 + 400W x 1 @ 4 Ohms, 200W x 4 + 700W x 1 @ 2 Ohms, 700W x 1 @ 1 Ohms, 400W x 2 @ 4 Ohms bridged

More Information
Product Name Rockford Fosgate M5-1500X5 5-Channel Waterproof Amplifier
Weight 7.0625
Width 12
Brand Rockford Fosgate
Manufacturer Part Number M5-1500X5
Model M5-1500X5
Product Type Amplifier
Condition New
Warranty 2 year
RMS Power 100W x 4 + 400W x 1 @ 4Ω